12-09-2010, 10:16
manuskoissa esiintynyt ISKY E-2 nokka akseli:
The E2 camshaft specs for the units availiable are
Cam lift-.294
Valve Lift-.453 (using rocker ratio of 1.54)
Lobe center-113 degree
Valve sequences of
intake opening-15.5 BTDC/intake closing 61.5 ABDC
exhaust opening 61.5 BBDC/exhaust closing 15.5 ATDC
Duration - 257 degrees with an overlap of 31 degrees
This is the earliest E2 grind.It is a small bit different from published specs as the masters wear pattern have changed.
ja toinen...lähde:
The E-2 specs in my '67 Iskenderian catalog spec out at .440 lift, 360 degrees of advertised duration, opening and closing of 20-60 on intake and 60-20 on exhaust, with .020 valve lash hot.
The E2 camshaft specs for the units availiable are
Cam lift-.294
Valve Lift-.453 (using rocker ratio of 1.54)
Lobe center-113 degree
Valve sequences of
intake opening-15.5 BTDC/intake closing 61.5 ABDC
exhaust opening 61.5 BBDC/exhaust closing 15.5 ATDC
Duration - 257 degrees with an overlap of 31 degrees
This is the earliest E2 grind.It is a small bit different from published specs as the masters wear pattern have changed.
ja toinen...lähde:
The E-2 specs in my '67 Iskenderian catalog spec out at .440 lift, 360 degrees of advertised duration, opening and closing of 20-60 on intake and 60-20 on exhaust, with .020 valve lash hot.

WWW
Haku
Jäsenet
Kalenteri
Apuja
Portaali
