WWW 
Haku
Jäsenet
Kalenteri
Apuja
Portaali
17-05-2009, 07:09
moi!
1.Using the ignition key insert it into the drivers door lock.
2.Turn the key clockwise to the locking position (the doors will lock) and hold it in this position for at least 5 seconds.
3.After 5 seconds slowly return the key to a central upright position.
4.The first digit - Turn the key fully, as far as it can go, anticlockwise to the unlock position (the doors will unlock) then back to the central upright position. This should be done the amount of times as the first digit on your security card.
5.The second digit - Turn the key fully, as far as it can go, clockwise to the lock position then back to the central, upright position. This should be done the amount of times as the second digit on your security card.
6.The third digit - Turn the key anticlockwise to the unlock position again, the number of times shown on the security card
7.The fourth digit - Turn the key clockwise to the lock position again, the number of times shown on the security card.
8.Once this has been completed turn the key to the unlock position once.
If the code has been entered correctly, open the door and the red
flashing LED light on the dashboard will stop. You will now be able to start the vehicle
--Janne--
1.Using the ignition key insert it into the drivers door lock.
2.Turn the key clockwise to the locking position (the doors will lock) and hold it in this position for at least 5 seconds.
3.After 5 seconds slowly return the key to a central upright position.
4.The first digit - Turn the key fully, as far as it can go, anticlockwise to the unlock position (the doors will unlock) then back to the central upright position. This should be done the amount of times as the first digit on your security card.
5.The second digit - Turn the key fully, as far as it can go, clockwise to the lock position then back to the central, upright position. This should be done the amount of times as the second digit on your security card.
6.The third digit - Turn the key anticlockwise to the unlock position again, the number of times shown on the security card
7.The fourth digit - Turn the key clockwise to the lock position again, the number of times shown on the security card.
8.Once this has been completed turn the key to the unlock position once.
If the code has been entered correctly, open the door and the red
flashing LED light on the dashboard will stop. You will now be able to start the vehicle
--Janne--
SM2YJK
044-7513573
"projekt Fenix" disco 1 V8 -98, "".........British humour....!""